The purpose of Mortar Net Solutions is to serve humanity by supplying products and services to building professionals that improve the sustainability of masonry structures through effective moisture management. Mortar net Solutions will bring satisfaction and security to designers, specifiers and tradesmen by delivering cost effective, high performance moisture management solutions that contribute to the construction of long lasting, trouble free masonry structures.

www.mortarnet.com

 

BlockFlash is a complete, embeddable flashing solution for managing moisture in exterior single wythe CMU walls.  It uses patented flashing pans to collect moisture in the wall and channel it to the exterior through integrated weep spouts.  Its included drainage mesh provides hundreds of clear pathways for water to flow around mortar droppings inside the block cells so it can be collected by the pans.

 

The BlockNet CMU flashing solution reliably protects single wythe CMU walls from water infiltration damage by enabling moisture to easily drain from the block cell interiors to the building exterior.

Water in the block cells flows down the inside of the face of the cells through the BlockNet vertical mesh component and onto the horizontal stainless steel drainage section, which channels water out of the wall through the integrated horizontal drainage mesh element and drainage tabs.

 
 
 
 

BTL-1 is a synthetic rubber sealant that is ideal for most construction applications.  It produces high-performance joints with both high strength and elasticity.  BTL-1 bonds aggressively to steel, aluminum, ceramics, wood, Kynar® -coated metal, glass, fiberglass and many plastics.

 

CellVent for masonry cavity walls helps ensure that moisture can migrate out and air can circulate into the cavity, and that insects can’t enter the cavity through the weep holes.

 

High Corner Boots

These tough 14″ high preformed corner boots for masonry cavity walls are only available from Mortar Net Solutions™. They are superior to typical 8″ corner boots because they extend above the standard flashing height and make it easy to create a consistently high quality corner every time.

 
 

In residential masonry cavity walls, mortar collection above the flashing and weep hole levels is vital for proper masonry cavity wall performance and to prevent water damage.  HouseNet suspends mortar droppings above the flashing and weeps so they stay clear and unobstructed. Its 90% open mesh allows moisture to flow to the weeps and air to move within the cavity to promote drying.  By using HouseNet for mortar suspension and collection, residential cavity walls perform the way they’re designed and walls stay fry and trouble-free.

 

The Patented Drainage Plane and Metal Lath System for Adhered Masonry Veneers. Designed for use with stucco, thin brick, stone and other types of adhered masonry.

 

The Original Mortar Dropping Collection Device. Nearly 25 years in the industry. Over 100 Million feet installed. Not a single wall failure.

 
 
 
 

MPE-1 sealant is a high performance, single component formulation for use in masonry construction. It provides excellent adhesion and sealing between brick, concrete, steel, copper, thermoplastic vinyl (PVC), glass, expanded polystyrene (EPS), and most common flashing membranes (rubberized asphalt, thermoplastic vinyl, and EPDM).  DO NOT USE WITH TPO OR TOTALFLASH COPPER/POLYPROPYLENE COMPOSITE MEMBRANE.

 
 

The patented TotalFlash Cavity Wall Drainage Solution is a complete, factory-assembled masonry cavity wall flashing system that cuts labor costs and provides better performance than standard through wall flashing.  It combines a flashing membrane with a mortar dropping collection drainage mat, weep tabs, drip edge and termination bar into a single, easy-to-install panel.

 

The patented TotalFlash Roll Cavity Wall Drainage Solution is a factory-assembled masonry cavity wall flashing system that provides better performance than standard through wall flashing.  It combines a flashing membrane, mortar dropping collection drainage mat, and drainage mesh weep tabs into a single, easy-to-install 50′ roll.  It provides superior moisture protection, slashes labor costs, and can be custom configured for your job, usually at no additional charge.

 
 

In masonry cavity walls, mortar collection above the flashing and weep hole levels is vital for proper masonry wall performance and to prevent water damage.  WallDefender suspends mortar droppings above the flashing and weeps so they stay clear and unobstructed.  Its 90% open mesh allows moisture to flow to the weeps and air to move within the cavity to promote drying.  By using WallDefender for mortar suspension and collection, cavity walls perform the way they’re designed and walls stay dry and trouble-free.

 

WallNet allows moisture to easily flow to the weeps, promotes drying to help prevent mold growth and moisture damage, and can help extend the life of siding materials by helping them dry from the back.

 

WeepVent for masonry cavity walls helps ensure that moisture can migrate out and air can circulate into the cavity, and that insects can’t enter the cavity through the weep holes.  The product’s compressibility means it can completely fill the weep holes, and “prickly adhesion” holds the WeepVent in place without fasteners or adhesives.

 

METAL CORNERS, DRIP EDGES, & TERMINATION BARS